Paintless dent repair near you? Here are the benefits of choosing paintless dent repair from your local auto body repair shop. Auto body repair can often be a costly affair. When you go the old fashioned way, you can be sure that your car will be in the repair shop for a few days at least. The traditional methods of repairing dents in vehicles meant that the cost of repairing the dent often outweighed the benefits. Painting costs were often added to the bill, creating many frustrated car owners. With paintless dent repair, you can save money at your auto paint and body store. If you live in a region prone to hail, then affordable dent removal is absolutely essential.

PDR technicians require a large arsenal of tools to successfully complete a job. “Pro” kits include various shape and length rods, wire tools, door hooks, window tools, black beauties, whale tails, flat bars and tweakers. Additionally, it is common to see technicians use light readers for accurate dent readings, LED lamps, and glue pulling kits. Every job requires multiple tools, and it is not the same for each individual case. However, the most common tool is the long metal rods used to gently push the metal back into place. These tools can be expensive, and the average car drivers are much better off paying for the service than buying their own set.

“Is car hail damage repairable?” Yes, most vehicle damage caused by hailstorms can be fixed, although the cost to fix your vehicle is dependent on the extent of the damage. In some cases, and especially if your vehicle is older, your best course of action is to accept the “car totaled by hail damage” label and buy a new one.

Boost your car value. Dents are an eyesore that depreciates the vehicle’s value. You can solve this problem when you opt for the best car dent remover. If your lease is ending soon, getting the car into tip-top shape becomes even more of a priority. Environmentally friendly. Whenever you take your car to the shop for body work, technicians are likely to use power tools to sand the damaged area, add paint primer, and so forth. With the best paintless dent repair kit, you don’t have to deal with the chemicals and toxic mess created through this process. It’s cleaner and safer to get the job done without plugging anything into an AC outlet. From the ease-of-use standpoint, the suction dent puller is the undisputed winner. The suction cup works with metal and plastic auto bodies. The cups are made of rubber and plastic. Depending on the size of the cup, it can lift upwards of 130 pounds. If you want one of the best suction dent pullers, consider whether the kit includes multiple suction cups. To begin working the underside of the sheet metal, the Tech uses long metal rods named PDR tools. These tools are used to reach into tiny gaps between panels and into other holes, and they prevent the need to remove panels and lining. However, for dents in difficult locations some disassembly may still be required. Using the PDR tools the Tech will slowly push the dent upwards repeatedly, stretching the metal back into its original position. Depending on the severity and location of the dent, this may take many pushing repetitions to flatten the dent.

Joe Dent LLC will repair your door dings, hail damage, creases, and minor dents without the use of paint or body fillers. We are a family owned, independent company providing local Paintless Dent Repair (PDR) and Nationwide hail damage repair. We understand how stressful this may be for you. As our vehicle is one of our top expenses and when we get caught in the middle of a hail storm we feel helpless. Joe Dent is an auto hail repair specialist and is here to help. This is how our process works: first we perform a hail damage inspection, followed by a hail repair estimation to your insurance company.

Unless you really know what you’re doing, attempting to repair hail damage yourself may end up costing you hundreds of dollars and possibly cause further damage to your vehicle. Therefore, hail damage should always be addressed by a professional body shop. They’ll have the necessary tools and experience to safely repair your vehicle. How to fix hail damage: The two most common methods for repairing hail damage are paintless dent repair and using body filler. Find even more details on auto repair hail services Dallas, TX.

When looking for an auto body shop that does paintless dent repair, always do your research first. Check if the company has an excellent track record and mostly positive comments from customers. Find out if they have the right certifications before trusting them to do bodywork on your car. By hiring an established company with certified experts, you are sure that your valued vehicle is in good hands.

Some tips for paintless dent repair projects: This technique is popular among automotive enthusiasts when it comes to the removal of small dents. The idea is simple: heat will inevitably cause the metal surface to expand and (hopefully) pop the dent out. Remember that the more time the car spends time under the sun, the better this technique will work. Use a plastic and/or leather conditioner for the car’s interior, so as to not damage it while exposing the car to maximum sunlight. If the sun’s heat isn’t particularly strong that day, a simple hair dryer could be used in conjunction with the sun to concentrate the heat to a specific area. Point the hair dryer to the dented area for two-minute intervals until the dent pops out. Be careful not to touch the hot lip of the hair dryer on any painted surface. A two-to-four inch gap between the dryer and the surface is recommended.

1st let’s start with some car paint care tricks: Applying dry ice to the dent is an effective way for fixing hail damage. The huge change in temperature can force the dents to pop out. Everything for you to do is just moving the dry ice around the damaged area to cool the area rapidly. But be careful as dry ice will damage your skin if you don’t wear gloves when handling it. Fixing hail damage by dry ice can be a cool solution, but sometimes it can not remove all of the dents. So in this case, you will need to do additional repairs.

Wax Your Car: Yes, I think it is accepted knowledge that your car needs to be waxed on a regular basis. If you have just bought a new car from a dealership, you must realize that no new car comes with wax from the manufacturer or dealer. New car prep does not mean the dealership is going to wax your car either. So that new car paint of yours is like taking a new-born child out in the sun with no sunblock on their skin. You can review my selection of best car waxes in helping you choose a quality car wax. Just remember your car should be waxed every 4-6 months under “normal” conditions. If you live in extreme weather conditions and you plan on keeping your car for over 5 years, you might consider applying wax to that new car paint even more frequently.

Use Hot Glue, Wooden Dowels, & Screws: When you attempt to take out dents yourself, you always put the risk that you might further damage your car, whether you make the dent worse or chip the paint. A safe way of trying to take out big dents on your car is by using several wooden dowels, a few screws, and a hot glue gun. Simply place two nails into each side of the dowel and put the hot glue on the bottom. Place the dowels glue-side down in areas around the dent, repeat as many times as needed to cover the area, let them dry, and pull each one out until the dent is gone.

In order to protect new car paint, you have to invest some time and effort to clean the vehicle on a regular basis. There are several car waxes and polishes available on the market. Although some car product manufacturers claim their products produce long lasting results, you will have to re-apply any product every few months, so the exteriors look appealing. If you’ve purchased a new vehicle that has a shiny coat of factory paint, avoid using too many detailing products as they rob the car of its original luster and also damage the paint. Find more details at evidentpdr.com.

If you are interested in learning how to do paintless dent repair, make sure that you take the time to gather the right tools and supplies, learn about the detailed process of PDR, and then spend time practicing your own repair techniques on metal panels from the local junk yard before you start doing repairs on your own vehicles.

So, we’ve explained what the procedure looks like — assuming it was done properly. And as you could probably guess there are a lot of ways an amateur or first-timer can get it wrong. It’s different than most other car repairs because it’s not about mechanical prowess; it’s more about control and the ability to maintain a steady hand and a gentle pace. You can’t rush it. The problem is, once a sheet metal repair starts to go awry, you’re usually much, much worse off than if you’d just left it alone. Metal holds its shape, but only to a certain point. Let’s say you get a dent in the hood — nothing too drastic, just a shallow, even dent with no sharp creases in an area that’s pretty easy to reach. You think it’ll be easy to pop it out on your own, so you begin to massage the underside while holding your shaping tool in place. You’ve made good progress so far, and a casual observer wouldn’t even notice the flawed area. But it’s not exactly perfect, and since it’s been fairly easy to this point, you decide to keep massaging the area to make it flawless. After a few more minutes of massaging, you realize that you’ve pushed it just a little too far. And now you’ve got this flabby area on the hood where you stretched out the metal. And there’s no easy way to shrink it back down. Keep going and it’ll stretch even more. Lesson learned.