Best masking tape factory: For those who need to label things, masking tape is an excellent choice. It’s easy to write on and sticks well but can also be removed without leaving any residue behind. Electrical tapes are highly resistant to heat and electricity. They’re used mainly in electrical wiring applications where insulation is needed. Medical or surgical tapes come with unique features like hypoallergenic adhesives that won’t irritate sensitive skin or damage wounds when they’re removed. Packing tapes are essential for securing packages during transport or storage as they have strong adhesion capabilities that hold up against heavy-duty use. No matter what you need adhesive tape for; there’s always a type available that will suit your needs perfectly! Find additional information at https://www.gytape.com/products. Office supply stores also offer different types of adhesive tapes, particularly for office-related purposes such as packing or labeling documents. These shops can be found in almost every city or town and offer the convenience of being able to buy on-the-go.

Fluoropolymer/PTFE/PVDF: Polytetrafluoroethylene (PTFE) is an insoluble compound that exhibits a high degree of chemical resistance and a low coefficient of friction. Fluoropolymer films, layers or coatings consist of plastics such as polytetrafluoroethylene (PTFE) or polyvinylidene fluoride (PVDF). Fluoropolymer is often used in applications that require superior chemical resistance, good dielectric properties and water and stain repellent characteristics. It’s also used in applications where the material handled must not stick to the belt, fabric or laminate. Films are synthetic resin adhesives that can include a carrier, but not all do. Transfer tape, a highly versatile product, consists of a thin adhesive film with no carrier and can be transferred to most dry surfaces as a peel-away release liner. Transfer tapes often use a release liner to improve handling and dispensing of the tape. Double-sided tape liners often incorporate differentially coated release liners that are easy to peel. These release liners are made either of paper, film or silicone.

Sometimes known as painter’s tape, masking tape is very easy to tear by hand and is made of a thin paper. Although it’s quite strong, it is easy to pull it off of the surface where it has been applied and comes in many different widths, depending on what you need the paint for. There are many strengths available, with ones rated closer to 100 being stronger. Most painters use masking tape rated around 50. It does a great job producing clean lines in paint jobs when applied correctly, as it will stop paint from bleeding into another area of the wall or project that is being painted. It can also be used on glass panes to keep the glass from shattering or to hang posters on the wall. Decorative masking tape, known as washi tape, is popular with scrapbookers and for decorating planners.

GANG YUAN(duct tape manufacturer& supplier)’s tape products series include multiple types. Duct Tape has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand. With the ever-increasing popularity of smart phones and tablet PCs, more and more electronics manufacturers have launched the “full-covered screen” that is manufactured with full lamination technology, conducive to enhancing the color contrast and making the screen display effect more colorfully.

As a masking tape wholesale supplier and masking tape manufacturer, Guangyuan Masking tape uses Europe imported crepe paper as the backing materials, which is coated with solvent-based natural rubber. It can be used in low/middle/high temperature, no residual glue after stripping off, and widely used in different industrials. Gangyuan Tape(aluminum tape manufacturer& supplier) will show you the aluminum adhesive tape series that is most popular with customers. GANG YUAN insists on the use of high-quality materials and advanced technology to manufacture adhesive tape. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.By now, there are over staff members in our company, among which there are members in the design team, in the R&D center, and staff in the after-sales department. All of them are well-trained. Find extra information on https://www.gytape.com/.

GANG YUAN custom tape manufacturer produces a number of different product series, including China Masking Tape, Adhesive Tape and Opp Tape. Closely following the market trend, GANG YUAN adhesive tape manufacturers uses advanced production equipment and manufacturing technology to produce China Masking Tape, Adhesive Tape and Opp Tape. The product receives favors from the majority of customers for the high quality and favorable price. By now, there are over staff members in our company, among which there are members in the design team, in the R&D center, and staff in the after-sales department. All of them are well-trained. 20 years of industry experience to create first-class adhesive tape, masking tape and opp tape products.

Best rated Plasma cutters online provider UK today: Friction welding is a solid-state process that uses, as the name suggests, friction to fuse metals together. Unlike most welding processes, it doesn’t use a welding torch, welding rods or a shielding gas to create welds. The process only uses the heat generated from high rotational, vibrational or lateral contact speeds between two clean metals to create a bond. The metal residue formed during this procedure is removed after the cooling process. The welding equipment used in friction welding is more eco-friendly than other methods as it doesn’t emit harmful welding fumes or release toxins into the atmosphere. Its simplicity makes it a great option for welding drill bits, connection rods, axle tubes and valves.

The following tips may help: Use the right type of regulator for the gas cylinder. Take care to inspect the regulator before attaching to the cylinder. If the connections aren’t properly made, perhaps you might be using the wrong device. Thus, it is wise to replace it with the right one. Close the valve of the cylinder, as well as release the pressure from the regulator, before removing it from a cylinder. Remove the regulator from the cylinder while transporting it to another location. A lightweight and easy to move machine designed to heat and enable the removal of mechanical parts in seconds. Recommended for removing worn nuts and bolts etc; It provides instant heat but without flame; Can be used in close proximity to heat sensitive objects such as cables and pipes, so no need to remove them before use. Shoulder strap provided; Light weight of 3.5KG; Easy to use as you can simply select your inductor, attach it, connect and you’re ready to go; Includes 5 inductors for various heating applications. This machine is especially recommended in the automotive, agricultural, maintenance and metal construction industry. Find additional details here induction heaters online shopping.

The S SATC PCS Metal Cutting Disc for Angle Grinder is made with a proprietary aluminum oxide grain combination that creates an aggressive cutting action. This allows the user to cut through materials more easily. In addition, the wheel also has a balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup. This means that you can cut through materials for longer periods of time without having to worry about the accuracy of the cut or the heat that is being generated. The SATC PCS Metal Cutting Discs will cut through most surfaces with ease and do not slow down as they work like other standard discs. These new discs also last much longer than other brands which allows you to make even more cuts before needing a replacement disc.

The Hobart Handler 140 is a bit of a hybrid between pro-level performance and homeowner convenience. The 140-amp rating is enough to weld up to 1/4-inch steel. This machine works both as a flux core welder and as a MIG. The duty cycle is 20 percent at 90 amps. That’s enough power to do most jobs you’ll ever tackle in a home shop setting, but for professionals working on heavy stuff like trailer frames or pipe fencing, it’s just not going to be enough. For other professional work like auto body or welding brackets, mountings and the like, this machine can run off a 4000-watt generator. It’s small enough to carry into a home for HVAC repair and the 110/115/120 input means you could use a small generator or the household receptacle to do the work. The solid aluminum wire drive accommodates either 4 or 8-inch spools and it’s selectable between multiple gauges of wire. The Hobart Handler 140 is backed by a 3-year warranty and its professional features and true MIG capability make it the our Pro Value Pick in this review roundup.

In many shops, the operator has to go to a tool room or supply area for a new contact tip, coil of wire or other welding accessory. This takes valuable time away from the welding cell and slows down overall productivity. To improve the operating efficiency and minimize wasted time, companies should stock at least a limited supply of all necessary items near the welding station – this includes shielding gas, flux and wire. Another helpful productivity enhancing tip is to switch to larger spools of wire such as from 25 lb. spools to 44 or 60 lb. spools to even larger packages of 1,000 lb. reels or 1,000 lb. drums. A simple switch like this means less changeover time, which adds up over the weeks, months and years. Shops should also be on the lookout for shielding gas waste. A simple device called a surge turbine can be placed at the end of the gun to provide a digital readout of the gas surge and flow rate. If the surge rate is high, investing in a surge guard can reduce the pressure, eliminating gas surges and waste. Leaks in the gas delivery system can also create a potential loss of money. By looking at the amount of consumables purchased each year and then examining the total gas purchased, a company can determine if there is a significant loss. Welding manufacturers and distributors should be able to provide average utilization figures so that loss can be detected. If there is a loss suspected, one of the easiest ways to check for leaks is to shut off the gas delivery system over the weekend. Check the level on Friday evening and then again on Monday morning to determine if gas was used while the system was in shut down mode.

How to pick a welder tips: Duty cycle: The advertised amperage of the machine offers a headline guide, but the duty cycle of the machine gives up the truth. Light industrial machine duty cycles can be as low as 20%, but more heavy duty MIG’s should range between 40-60%. If a 300amp MIG has 30% duty cycle for instance, it’s on the edge of acceptability. Duty cycle is determined by how many minutes out of 10, it can weld at 100%. Duty cycle testing: MIGS tested at 20 Degrees & 40 Degrees we consider good. (Beware any manufacturer who doesn’t quote an ambient temperature for testing) Manufacturer’s warranty: Always a great guide to quality. A three year warranty is good. Weld characteristics: Make sure the arc is smooth & suits your application. (Some machines are better suited at the low range and others at higher amperage range).

The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.

Several tips on welding equipment, MIG and TIG welders, plasma cutters. Welders with a higher power output can work with thicker metals, but higher voltage welders will require special power supply set ups—either generators or appropriate power outlets. A welder with lower voltage in the 100’s will not be able to handle heavy duty jobs, but it can be plugged in and operated from any outlet. Any welder with power over 200 cannot run off a typical power outlet and will naturally cost more to run. In addition, welders will either run an alternating current (AC) that reverses itself at regular intervals or a direct current (DC) that flows in one direction and does not reverse itself. DC offers a steady rate of energy that leads to hotter temperatures and deeper weld penetration. AC welders usually cost less than DC welders, but the available electrodes are far more limited for AC. In fact, DC welders are more costly but remain popular because their higher power offers a wider selection of electrodes and a number of working advantages such as: simple arc striking, better penetration, and improved control. Welders who expect to work on a wide variety of projects may want to consider an AC/DC combination welder.

Talking about the importance of soldering and welding is pointless if you already know about them. But, both of them have the drawback of emitting hazardous gases. Welding fumes contain considerable amounts of hydrogen fluoride gas, carbon monoxide, argon, and carbon dioxide. Also, the gases are known to contain manganese, beryllium, lead, aluminum, and arsenic. All of these can cause severe illnesses like cancer, kidney failure, and lead poisoning. So, is it wise to breathe in those poisonous fumes?

DeWalt dwe1622k magnetic drill press is the best magnetic drill machine for the money available in the market. They improved the drill press through several developments that make the drill press a position on DIY expert workshop. This drill press is a perfect drill press not only for its perfection but also for its unique feature to satisfy your requirement. It is provided with feeding handle that can be easily installed any side of the drill press. For optimal performance and variety of applications, this excellent mag drill press featured with two-speed setting and 10 amp motor which make this drill press a metal or wood drilling breeze. This excellent mag drill package includes the magnetic coolant bottle that protects your drill press from overheat. It can be fitted on either side of the drill press.

Our vision and our distinct set of values drive the success and spirit of our organization. At ESAB, under Colfax leadership, we live our values. As a premiere U.S. welding equipment manufacturer, our vision and values help us to make strategic decisions, allocate resources, and focus our choices every day, domestically and internationally. ESAB offers a world of products and solutions for virtually every welding and cutting process and application. We serve industries that serve the world. The Best Team Wins – Team-oriented, involved associates are our most valuable resource, and we are passionate about attracting, developing, and retaining the best talent. Living this value is done in three primary ways: 1. Building the right team – having the right people to do the job; 2. Creating the right environment – making sure that leaders create an environment where all associates can contribute, and 3. Getting the win – when you have the right people and right environment – it makes getting the win a lot easier!

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here.

Keep in mind that if you want to get the most out of your MIG welder, you need to do a lot more than choose the right model. You’ll also have to be cautious with your welding strategy and make sure that you always exercise safety practices when using any kind of MIG welding machine. Wearing a welding hood, safety glasses, gloves, and stainless steel toe boots is a good practice for professional welders. When it comes to actually buy your welder, it can be a good idea to list your ideal price range and create a pros and cons table for each of the potential products that you think might be suitable for your needs. Finding and buying the ultimate MIG welder isn’t easy. Whether you’re new to welding and you’re taking it up as a way to learn a new skill or build on a hobby, or you’ve been welding for decades and you’re about to make your practice into a profession, it’s essential to have the right equipment. A MIG welder can be a powerful piece of machinery in the right hands. However, like anything else in this world, some devices are built better than others. See more details on here.

Out of a huge product range of the Dirty Pro Tools, we have found a top-grade MIG welder that turned out to be so good that we have decided to add it to this shortlist. It is the tool for welding metalware of medium thickness with the output range from 50? to 60?, best for sheets up to 2 mm thick. In addition, a pretty powerful converter of this welder allows working for about 6 minutes at 50?. So, you’ll be able to weld thin pieces for a good while, and the fan will provide a decent cooling of the tool. However, when the MIG welder overheats, the red light will flash telling you to stop welding and make a pause. By the way, you can pick either of 4 available amperage settings and adjust the wire feeding speed for reliable and straight welds. We were pleased by the package that includes a face shield, a clipping hammer, a brush and a spool of welding wire, so you can start welding right after unpacking the unit. So, this Dirty Pro Tools welder is one of the most affordable models for people seeking a mid-power machine to weld fine metal sheets.

UK market dive: Like LOTOS Technology and LONGEVITY Inc, Everlast has a little over a decade in experience. It is a California company which was founded in 2004. The light and efficient Everlast welder has one of the best duty cycles on our list. With the most basic of designs, this Everlast power-mig welder is perfect for novices. Along with other welders with 4, 7, or 10 voltage settings, the Everlast has infinite settings for voltage and also wire speed, making it a customizable experience. The Everlast 140amp MIG welder can cut mild steel, stainless steel, as well as chrome-oly at a thickness of 3/16 inches. It can be used with both four-inch and eight-inch wire spools. It’s incredibly lightweight for the power it gives out.

High quality Mag drills supplier Ireland today: The machine uses a high-speed stream of electrons that is tightly focused using magnetic fields and applied to the materials to be joined. An energy beam welding machine has the ability to weld thick metals into thin metals. In addition, the welder can also join different types of metals. These types of welding machines can weld specific points on metals. There is little or no heat distortion in the welded areas. Since the welder must perform this welding in a vacuum as the electron beam will be absorbed by the air, this machine is not for home use.

Miller is a Wisconsin-based company that has been in the business since 1929. At just 38 pounds, the Millermatic is ultra-portable and is one of the lightest welders on our list. It is preferred by amateur welders and professionals alike for its usability. It is also one of the most expensive at over $3300, so bear that in mind as you read on! The Millermatic runs at dual voltage. It welds stainless steel, mild steel, and aluminum (with the help of a spool gun). It can weld mild steel to a thickness of 3/8 inches, giving it greater ability than the Hobart Handler. As for its aluminum welding capabilities, it can weld from 18 gauge to 3/8 inches again. It comes with flux core abilities. Read additional info at TIG welders.

In many shops, the operator has to go to a tool room or supply area for a new contact tip, coil of wire or other welding accessory. This takes valuable time away from the welding cell and slows down overall productivity. To improve the operating efficiency and minimize wasted time, companies should stock at least a limited supply of all necessary items near the welding station – this includes shielding gas, flux and wire. Another helpful productivity enhancing tip is to switch to larger spools of wire such as from 25 lb. spools to 44 or 60 lb. spools to even larger packages of 1,000 lb. reels or 1,000 lb. drums. A simple switch like this means less changeover time, which adds up over the weeks, months and years. Shops should also be on the lookout for shielding gas waste. A simple device called a surge turbine can be placed at the end of the gun to provide a digital readout of the gas surge and flow rate. If the surge rate is high, investing in a surge guard can reduce the pressure, eliminating gas surges and waste. Leaks in the gas delivery system can also create a potential loss of money. By looking at the amount of consumables purchased each year and then examining the total gas purchased, a company can determine if there is a significant loss. Welding manufacturers and distributors should be able to provide average utilization figures so that loss can be detected. If there is a loss suspected, one of the easiest ways to check for leaks is to shut off the gas delivery system over the weekend. Check the level on Friday evening and then again on Monday morning to determine if gas was used while the system was in shut down mode.

How to pick a welder tips: Stepped voltage or synergic: Synergic MIG’s have the edge when you’re welding stainless & aluminium as they are pre-programmed, easy to set up & portable. They also provide a better weld characteristic and so give cleaner weld bead with less/no spatter. Inverters: Considerably smaller and lighter and so ideal for site work. All inverters are stepless and so have infinite control. Also cheaper to run power wise. Budget: How much welding are you going to undertake? Gear your purchasing decision around the jobs you will be working on the most. Polarity changeover; A lot of welders at the light industrial end will to be able weld with gasless flux cored MIG wire. Is the switchover easy on the machine you’re considering. Availability of spares & after sales service: Ask where the machine is actually made. Even the more recognised brands largely outsource their production, which can lead to quality and after sales issues with lack of continuity of supply for spares.

Although this class of welders is referred to generically as MIG welders, the technical definition is “wire feed”, meaning they use a motor-driven spool to feed wire into the weld puddle. MIG means “Metal-Inert Gas” and refers to a flow of inert gas that shields the metal wire as it is consumed and melts into the puddle. If the machine isn’t able to connect and regulate a flow of inert gas like argon or carbon dioxide, it’s technically not a MIG welder. An example in this review is the Forney Easy Weld 140 FC-i, which doesn’t have gas shielding capability. This is a flux-core wire feed machine. The wire that’s used in these machines has welding flux embedded in the core. When it hits the arc, the metal melts and the flux is released as vapor, providing a shielding gas. This was originally designed as a way to deal with windy conditions defeating the gas shield of a MIG torch. It’s not as clean as true MIG welding but usually, the difference is minor, especially in a home workshop setting. However, with aluminum or stainless steel, the weld won’t be correctly joined without true gas shielding and a quiet setting. Flux core won’t be enough for these projects.

A few advices on welding equipment, MIG and TIG welders, plasma cutters. Welders with a higher power output can work with thicker metals, but higher voltage welders will require special power supply set ups—either generators or appropriate power outlets. A welder with lower voltage in the 100’s will not be able to handle heavy duty jobs, but it can be plugged in and operated from any outlet. Any welder with power over 200 cannot run off a typical power outlet and will naturally cost more to run. In addition, welders will either run an alternating current (AC) that reverses itself at regular intervals or a direct current (DC) that flows in one direction and does not reverse itself. DC offers a steady rate of energy that leads to hotter temperatures and deeper weld penetration. AC welders usually cost less than DC welders, but the available electrodes are far more limited for AC. In fact, DC welders are more costly but remain popular because their higher power offers a wider selection of electrodes and a number of working advantages such as: simple arc striking, better penetration, and improved control. Welders who expect to work on a wide variety of projects may want to consider an AC/DC combination welder.

Keep in mind that if you want to get the most out of your MIG welder, you need to do a lot more than choose the right model. You’ll also have to be cautious with your welding strategy and make sure that you always exercise safety practices when using any kind of MIG welding machine. Wearing a welding hood, safety glasses, gloves, and stainless steel toe boots is a good practice for professional welders. When it comes to actually buy your welder, it can be a good idea to list your ideal price range and create a pros and cons table for each of the potential products that you think might be suitable for your needs. Finding and buying the ultimate MIG welder isn’t easy. Whether you’re new to welding and you’re taking it up as a way to learn a new skill or build on a hobby, or you’ve been welding for decades and you’re about to make your practice into a profession, it’s essential to have the right equipment. A MIG welder can be a powerful piece of machinery in the right hands. However, like anything else in this world, some devices are built better than others. Read extra info at https://www.weldingsuppliesdirect.ie/.

Power tool pioneers Bosch have been in the game since 1886. They certainly know a thing or two about making one of the best corded angle grinders on the market. I was amazed at the power output and precision you can achieve with the GWS 7-115 angle grinder. Starting off with the look and feel of this grinder, it’s surprisingly slimline and lightweight. It’s certainly easy to hold on to and weighs less than 2 kg. Bosch have made use of a clever 20° angle side handle as well for ultimate precision grinding. Making use of one of Bosch’s brilliant 720 Watt Champion motors, you know this is a tool that’s built to last. Everything is chunky and built for hard work. They’ve included a two-stage safety switch to avoid accidental starts, which is essential for any tool like this. The motor spins a 115 mm cutting disc up to an impressive 11,000 rpm. There’s a relatively low amount of vibration when in use as well. Just 6.5 m/s², which isn’t bad at all for corded grinders. I like the fact that Bosch have flattened the gear head. This reduces the overall size and makes it easy to get into tight spots. If you’re looking for one of the best angle grinders from one of the top names in the business, this is a great choice.

Sturdy Build and Fixed Wheels. The machine is built with precision and sturdiness. It comes with a bamboo duct that can move around freely in any direction. I’ve found alloy rivets with buckle and anti-corrosion features. The handles make it easier to carry the device anywhere you need. Fixed wheels on the bottom of the machine make it a mobile device. DC Brushless Motor and 150 CFM Airflow The KNOKOO welding fume extractor can generate 150 CFM airflow with 110V power. It comes with a shutter outlet for letting the air out. The DC brushless motor ensures thorough purification, and the power-failure protection saves the machine from sudden power failure. 3 Layers of Filter and Versatile Uses The machine comes with 3 layers of filters for efficient fume extraction. I’ve found pre-filter cotton in the first layer that can remove large particles. The second layer can remove dust and tar, and the third layer can remove gas and smoke.

Evolution Power tools magnetic drill press is one of the top-rated magnetic drill machines. It is most famous for its lightweight and compactness, excellent and well-constructed magnetic drill machine at a reasonable price. This is ideal for bridges, I-beams, and framework. This can provide 1300 Kgf. Or 2860 lbs f magnetic adhesion. Its maximum core diameter is about 28 mm or 1-1/8 inch. It can give a depth cut maximum of 50 mm or 2 inches. Evolution Power tools magnetic drill press also provide Weldon shank cutter fitting type -19 mm. It also offers a wide variety of tools to be used with Evolution Power tools magnetic drill press. This package includes a wide range of annular cutter, step drills and mini cutters, evolution cutting fluid.

The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.

Welding Supplies Direct are the UK distributor for GPPH welding tables, manufactured to the highest standards in Europe. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. Our modular welding benches come equipped with a hole system of all sides (tabletop & all sides); the holes are 28MM in diameter and have a chamfered edge for easy tool assembly. You have the option of standard legs or castors being fitted, too.

The Lincoln PowerMIG 210 is the ultimate MIG welder for versatility. It comes with the capability to perform MIG, Stick, TIG and Flux Core welding at both 120v and 240v. This is perfect if you’re looking to buy a MIG welder and are considering buying a TIG or Stick welder as well. Buying a multi-process welder like the PowerMIG 210 can save you a lot of money rather than buying separate machines. Lincoln are the market leaders when it comes to manufacturing quality and the PowerMIG 210 is top of the range to build quality and weld quality. The digital display on the front of the machine lets you easily key in your variables to get you get set up in no time at all with an easy to use user interface. See the full review here.

Sealey is one of the biggest manufacturers of tools and accessories in the UK, offering approximately 8000 items including tools for home, repair shops, agricultural facilities, as well as cleaning. In this variety, we found a gasless MIG welder MIGHTYMIG 100. The machine is able to weld metal sheets of a different thickness thanks to a toggle that allows setting the amperage to the minimum and maximum. The output range will be 55? and 100?, respectively. We should say that the welding time at the minimum power won’t be over 6 minutes. Yet, this welder will run for about 2 minutes at 90? and that’s great considering its moderate price. In addition, you’ll be able to manage the joint by varying the speed of the wire feed, just turn the relevant control knob to the desired setting. By the way, the welder is compatible with a flux-cored wire up to 0.9 mm, and the weight of the spool should be 0.9 kg. Like most welding tools, it features an overheating protection, and the orange light will notify you when the welder gets overheated after a long use. Apart from that, the forced air cooling system will chill the welder’s internal parts. The welder has a non-live torch for your convenience that will increase the accuracy of welding and provide safety.

Whether you’re a professional contractor or a DIY enthusiast and looking for a metal-cutting tool, this disc is a must-have. The cutting wheel is a great way to quickly cut through metal. With 52 wheels, you’ll always have one on hand. It is compatible with all 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor. The thickness of the wheel is 0.045 inch (1.2mm). You can operate this up to 13,300 RPM When it comes to precision and burr-free cutting, the Truswe Metal and Stainless Steel Cutting Wheel for Angle Grinder is tough to beat. This ultra-thin design delivers fast and accurate performance, with minimal material loss. The Metal Cutting Discs are made of aluminum oxide grains which are more safe than other wheel types. These discs should only be used when wearing all applicable safety gear because they can fly off the wheel and injure you if not careful. You should read the instructions before using this power tool. It is a heavy duty cutting disc that is fitted to any angle or side grinder. It will cut with ease through sheet metal, plastics, fiberglass, Plexiglas, ceramic tiles and even rubber.

Never drag, roll, or drop cylinders during the use. Always take care to maintain the valve caps during the transport. Avoid lifting the cylinder using a valve cap. Never store the cylinders for a long time period. Gas cylinders should only be purchased in small quantities. Never store them for long time periods. It is important to follow extreme precautions and safety measures while working with industrial gas cylinders due to several hazards and risks posed by them. Sourcing these cylinders from a reliable manufacturer is the most important safety measure for any facility owner using these cylinders.