Category: Technology

Professional electronic parts marketplace info aggregation platform

Technology

Electronic supplies info details information aggregation platform by Easybom? Easybom, an international integrated service provider for the electronics industry, persists in pursuing the concept of “win-win”. Dedicated to providing electronic component big data information services that are maintained by senior industry engineers, easybom has established an excellent communication platform for merchandisers, suppliers, and engineers through our powerful electronic component search engine. Easybom will keep focusing on the leverage of our high-quality services for data mining and information matching. Easybom is driven by data which create numerous business chances. Easybom provides intelligent data analysis to enhance your insight into the market. It focuses on the market as well as your need. See additional information at find electronic parts.

Nowadays, Wi-Fi devices are ubiquitous in our lives. Casually open the home wireless routing management interface, there may be no less than 10 Wi-Fi devices online at the same time. The increase in the number of devices leads to network congestion, performance degradation, increased delay and other problems. These problems became more serious in the era of Wi-Fi 5 (802.11 ac). Therefore, when designing Wi-Fi 6 (802.11 ax), experts made improvements and innovations specifically for the problem of network congestion. So, what new technologies does Wi-Fi 6 use to improve wireless channel capacity? When the user equipment receives the AP signal, it will compare whether the color it receives is consistent with the current associated AP color. When the color is the same, the user will think that the signal is the signal in the cell. If the color of the received signal is different from that of the associated AP, the user determines that the signal belongs to the interference signal. As shown in the following figure, due to the use of different color codes, the channel 1 of the green cell is no longer interfered by the adjacent cell channel 1 (blue and red).

With the increasing degree of automation of cars and electric vehicles, the number of semiconductors required will increase sharply. Most semiconductors are traditional analog and power semiconductors. These traditional analog and power semiconductors are produced by 8-inch factories. Because it is difficult to ensure 8-inch manufacturing equipment, it is difficult to add new 8-inch semiconductor factories. In short, self-driving cars certainly need state-of-the-art semiconductors to run advanced artificial intelligence (AI), but the need for a large number of traditional analog and power semiconductors has become the Achilles’ heel of automobile production, and it is not easy to solve this problem. Although the automobile industry has ushered in an once-in-a-century period of great change in CASE (Connected, Autonomous/Automated, Shared, Electric), it is also an era suffering from the shortage of semiconductors.

The system-on-chip (SoC) is the heart of the embedded architecture and is where the actual imaging processing takes place. On many occasions, the technical term “SoC” is colloquially equated with “processor”. In reality, however, SoCs contain more than that. In addition to single-core or multi-core parallel CPUs (central processing units), there are GPUs (graphics processing units), interface controllers (such as USB, Ethernet, I²C, etc.), internal bus systems, multimedia hardware (such as video encoding and video decoding), internal power management, and more, all contained within this single chip. In short – an SoC neatly integrates many of the core components in a PC into one.

Bom Tools: Easybom provides a stronger technology team. Huge model database to support identification. BOM selection has tens of millions of model data, which can recommend the best choice for users and support the selection of others. Become an Online Member For Free! Easybom, a powerful search engine for the electronic component industry, help you search the electronic components and supply prices you want in a fast and easy way. Discover extra info on https://www.easybom.com/.

Blockchain in logistics strategies in 2021 by MaryAnn Holder

Technology

Meet MaryAnn Holder-Browne and some of his blockchain multiparty network ecosystems ideas? MaryAnn Holder on One Network’s Intelligent Control Tower: One Network’s Intelligent Control Tower is not your typical control tower, that provides visibility to immediate trading partners only. The Intelligent Control Tower monitors, manages, and controls decisions and execution across functions and across companies to optimize the entire network. The Intelligent Control Tower uses AI and serves as a system of engagement across trading partners, and orchestrates companies, people and things to work together in real-time to serve the end consumer. Until recently, supply chain control towers have been all about providing visibility to your immediate trading partners. But with the development of multi-party, consumer-driven networks, advanced control towers now provide real-time visibility, collaboration and powerful AI capabilities to move beyond decision-support to decision-making and autonomous control.

This year is the first time Gartner has published a report on multienterprise supply chain solutions. The report stated,”Networks are not new, but with companies focusing more on having end-to-end (E2E) processes include their external trading partners, these networks are increasing in importance and value. Collecting data and sensing signals in real time, and then coordinating, executing, and resolving issues quickly, will allow companies to operate their supply chains more effectively.”

But before applying the technology to logistic processes, let’s first start by understanding the function of blockchain. Blockchain is a shared, tamper-resistant digital ledger that provides a near real-time record of things such as transactions, records of ownership, locations, values, state of goods, etc. The ledger is shared among parties which brings transparency to the supply chain, because everyone is equally informed about things like the location, carrier, condition, and documentation relating to a shipment. Smart contracts can further automate many transactions based on other transactions, such as triggering a change in ownership titles when a payment is made. Discover extra details on MaryAnn Holder.

The network has over 75,000 participating organizations, allowing customers to find partners and collaborate around their plans. It supports industries in CPG, retail, restaurant and foodservice, healthcare and pharmaceuticals, high tech, aerospace, defense, and government, automotive, and logistics service providers. According to the report, One Network has taken several steps with its planning applications to increase automation and usability for its customers by providing intelligent agents that perform a host of functions such as forecasting, replenishment, sourcing, and transportation optimization. MaryAnn Holder-Browne, Chief Marketing Officer of One Network: “We are thrilled to once again be recognized by Nucleus Research”.

MaryAnn Holder-Browne is Chief Marketing Officer at One Network Enterprises, a provider of the blockchain-enabled network platform, The Real Time Value Network. Back in 2002, Greg Brady, a supply chain visionary and Ranjit Notani a pioneer in multi-enterprise collaboration technology came to the conclusion that the traditional paradigm of business-to-business collaboration built around enterprise-centric software was fundamentally flawed. Businesses must take an outside-in network view and together serve the end consumer. In May 2003, they acquired Elogex, a cloud-based logistics software company, and founded One Network Enterprises with a vision to create consumer-driven business networks. They developed a network platform that enabled entire business communities to collaborate and work together to serve the consumer. Brady and Notani brought the network way of conducting business just as LinkedIn did so to managing professional contacts. They re-imagined how business software is built, delivered, and used for today’s dynamic and highly inter-connected world.

How many degrees deep do you think your buyer persona is? The same buyer group has multiple. A lot of times they’re at VP level, director level, C-level people. They have the same kind of educational background but do yours vary? For instance, if you’re trying to provide a solution to someone, are you dealing with multiple educational boundaries or any type of boundary like that? Well in a certain sense, yes. The office of the CFO is going to have a different, well, maybe not different educational status, but they’ll certainly have a different bent to their studies. They will have a different focus. We market to the whole organization when we’re looking at the supply chain. What we’re looking at the office of the CFO, the office of the CIO, the office of the CEO and then the office of supply chains. All of those buying units have their own individual needs that they have to balance within the greater organizational structure. When we build out our buyer personas, we look very closely at what are the things that are going to make that person a superstar even down to what are the types of people. I mean we look at the psychographics as well as the basic demographics that you get for a position such as a supply chain director. We might look at an engineering background and the way they make decisions so a lot of that factors into how we message to that.

Best capacitive level measurement provider in China

Technology

Best capacitance level transmitter manufacturer in China? The advantages and disadvantages of capacitive level gauges: The measurement of the capacitive level sensor mainly depends on the capacitance change between the two electrodes, which means that the sensitivity of the capacitive level gauge depends on the difference of the dielectric constants of the two media, gas and liquid. The measurement of the capacitance level sensor must ensure that the dielectric constants of the two media remain the same, otherwise the change of the dielectric constant will directly cause errors. Find more details on capacitance level transmitter.

What is an anemometer/wind sensor? An anemometer is an instrument that measures the air velocity. The main applications of wind sensor are in the field of meteorology and industrial applications such as in wind turbine business or high-rise crane safety monitoring. Wind speed sensor & wind direction sensor are used for wind speed and direction measurement. For the measurement of wind speed and wind direction, several principles may be used, as described in the WMO ‘Guide to Meteorological Instruments and Methods of Observations.

Automatic weather station (AWS), also called automated weather station, is an automated version of the traditional weather station, either to save human labour or to enable measurements from remote areas. An automated weather station is an automatic version of a traditional weather station. It can automatically transmit or record observations obtained from measuring instruments. They can be single-site or part of a weather network. Hunan Rika Electronic Tech Co.,Ltd is a privately held weather sensors and environmental sensor manufacturer and solution provider of environmental & weather monitoring for 10+ years.

Rain gauge is a meteorological instrument for determining the depth of precipitation (usually in mm) that occurs over a unit area (usually 1m2) and thus measuring rainfall amount. One millimetre of measured precipitation is the equivalent of one litre of rainfall per metre squared. We offer tipping bucket rain gauges, radar rain gauges, rain sensor switches and evaporation sensors, all of which are used in hydrometeorological monitoring and agriculture. Rainfall monitoring is very important in wide range of fields like meteorology, hydrology, agriculture, forestry, field monitoring stations and other industries, which enable people to prepare in advance. So we can imagine the importance of rain gauge. There are various types of rain gauge such as wireless rain gauge, tipping bucket rain gauge, automatic rain gauge station, etc.

Hunan Rika Electronic Tech Co.,Ltd, located in Changsha, is a privately held sensor manufacturer and solution provider of environmental & weather monitoring for 10+ years. Rikasensor is committed to developing and providing intelligent and cost-effective IOT environmental monitoring products and services, which including: wind measurement, solar radiation measurement, temperature and humidity measurement, hydro-meteorological measurement, soil moisture measurement , water quality measurement , data loggers and various weather stations and meteorological monitoring stations . The products are CE , ROHS certificated , and widely used in solar energy , smart agriculture , aquaculture , sewage treatment , air quality , wind power generation and relative fields of meteorological environment monitoring . The company have obtained certification in quality management system , such as ISO9001, TUV . See extra details at https://www.rikasensor.com/.

Siphon type rain gauge is an instrument that can record precipitation and precipitation time continuously. The upper water funnel is the same shape and size as the rain gauge. When the rainwater through the funnel into the measuring cylinder, the float in the cylinder will rise with the rise of the water level, driving the pen to draw a curve of the water level rise on the paper. When the water level in the measuring cylinder reaches 10 mm, the water is discharged quickly with the help of a siphon, and the nib falls back to zero to record again. The recording clock gives the accumulation of precipitation over time.

Best pcb prototype assembly manufacturer 2022

Technology

Premium pcb manufacturer right now? Peelable mask are applied by screen-printing, act as in-process protection and are removed after processing at the assembler. Because the fabricator can apply the mask in any design, they can create one fluid piece which will allow the customer to peel the entire design off in one pull. Peelable mask provides protection in soldering processes like wave soldering, reflow soldering or hot air solder leveling(HASL). Rebiable, time-saving and cost-saving in their application, they have long surpassed manual masking with heat-resistant tapes. See extra information at pcb manufacturer China.

Generally speaking, aluminum is the most economic option considering thermal conductivity, rigidness, and cost. Therefore, the base/core material of normal Metal Core PCB are made of aluminum. In our company, if not special request, or notes, the metal core refer will be aluminum, then MCPCB will means Aluminum Core PCB. If you need Copper Core PCB, Steel Core PCB, or Stainless steel core PCB, you should add special notes in drawing.

A-TECH has advanced pcb assembly manufacturing equipments, leading technical level, excellent technical team, procurement team, quality engineering team and management team, professional hardware engineers and software engineers to provide professional PCB fabrication / component procurement / SMT processing / functional testing and other one-stop services for domestic and foreign companies, and provide PCBA products with follow-up before, during and after production jobs. Currently we have successfully obtained ISO 9001:2015, ISO 13485:2016 and other certification systems. The company’s main market is distributed in many countries and regions around the world, such as Europe, North and South America, and the products are mainly used for consumer electronics, medical equipments, industrial control equipments, communication devices and other industries.

With our advanced equipments and strong manufacturing capability, we’re able to provides an extensive range of PCB fabrication,PCB design and service, the printed circuit boards we manufactured include: from simple single sided PCB, double-sided PCB to complex multilayer PCB up to 30 layers, Metal core PCB, Flexible PCB, Rigid-flex PCB, HDI PCB, Microwave RF PCB and so on, the pcb assembly service we offer based on our assembly plant include: SMT, thru-hole, combo of SMT and thru-hole, consigned pcb assembly, partial consigned pcb assembly and full turnkey pcb assembly. Find extra information on https://www.atechpcb.com/.

Tg means Glass Transition Temperature. As flammability of printed circuit board (PCB) is V-0 (UL 94-V0), so if the temperature exceeds designated Tg value, the board will changed from glassy state to rubbery state and then the function of PCB will be affected. If working temperature of your product is higher than normal (130-140C), then have to use High Tg PCB material which is > 170C. and popular PCB high value are 170C, 175C, and 180C. Normally the FR4 circuit board Tg value should be at least 10-20C higher than working temperature of product. If you 130TG board, working temperature will be lower than 110C; if use 170 high TG board, then maximum working temperature should be lower than 150C.

Top rated consumer electronics and internet security guides with Michael Pertuit

Technology

Michael Pertuit internet security and electronic devices tips and tricks today? And then there’s the not-insignificant concern of lost smartphones. A lost business phone in the wrong hands could be a complete disaster. At the very least, all phones used to conduct business should have password protection, whole-disk encryption software and a remote lock-and-data-wipe app. That way, you can erase all the information on a lost phone and prevent anyone else from using it. The rise of flexible work-from-home policies has been a major trend in recent years, which is generally great for employee morale but not so great in terms of security. It’s tricky but obviously crucial to keep up security measures when employees are doing their jobs remotely. The guidelines about smartphones apply here, but you also need to ensure that strong safeguards are in place on all company computers and devices, no matter where the employee is working.

Michael Pertuit about ransomware attacks: Protect Your Sensitive Personal Identifiable Information (PII). Personal Identifiable Information (PII) is any information that can be used by a cybercriminal to identify or locate an individual. PII includes information such as name, address, phone numbers, data of birth, Social Security Number, IP address, location details, or any other physical or digital identity data. In the new “always-on” world of social media, you should be very cautious about the information you include online. It is recommended that you only show the very minimum about yourself on social media. Consider reviewing your privacy settings across all your social media accounts, particularly Facebook. Adding your home address, birthdate, or any other PII information will dramatically increase your risk of a security breach. Hackers use this information to their advantage!

Michael Joseph Pertuit on internet security: Make Sure Employees Look for the S in HTTPs When Searching the Web. Employees will, from time to time, use the corporate IT network to visit websites or sign up for services, either for personal use or for the company. Before submitting any information, they should always be on the lookout for the padlock and HTTPS in the address bar. If the site is unprotected, they should not enter any information. Note: It’s important to also educate employees on phishing websites (see tip 15 below). There have been cases of phishing websites using Domain Validated (DV) SSL Certificates to make their sites look more “real” and “trustworthy”.

Michael Pertuit about data breach: You might want more comprehensive monitoring to know in real-time if your data has leaked. Products like Kaspersky Security Cloud offer data leak detection and help you navigate the situation. Of course, the best way to protect yourself is to avoid being a victim in the first place. No security plan is perfect, but there are ways you can defend yourself — whether you’re an individual or an enterprise. How to Prevent Being a Data Breach Victim: Data breach prevention needs to include everyone at all levels — from end-users to IT personnel, and all people in between. When you’re trying to plan how to prevent data breach attacks or leaks, security is only as strong as the weakest link. Every person that interacts with a system can be a potential vulnerability. Even small children with a tablet on your home network can be a risk.

What if you have a lot of devices you want to protect? Or you’d rather not go through the trouble of downloading and signing into the app over and over again. Maybe you want to ensure that all the devices on your network are always protected without having to remember to connect to the VPN. A VPN router sounds right up your alley in that case. These routers are capable of running VPN software directly with little fuss and lets you connect all your devices to it without needing any additional software or apps. Of course, a VPN router helps you bypass the issue of limited simultaneous connections as well. See even more details at Michael Pertuit.

Pcb manufacturer with Atechpcb

Technology

Top rated pcb prototype assembly supplier today? We are engaged in the production, processing and sales of PCB manufacturing. A-TECH focuses on providing a variety of PCB manufacturing for customers, offering blind vias pcb, via in pad pcb, countersink pcb, edge plating pcb, thick copper pcb and impedance control pcb. A-TECH has the ability to meet different needs. PCB manufacturing is available in multiple types and specifications. The quality is reliable and the price is reasonable. Since the establishment, A-TECH has always been adhering to the service concept to serve every customer wholeheartedly. We receive acclaim from customers by providing thoughtful and caring services. See even more details on pcb manufacturer.

Advantage of MCPCB: Some LEDs dissipate between 2-5W of heat and failures occur when the heat from a LED is not properly removed; a LED’s light output is reduced as well as degradation when the heat remains stagnant in the LED package. The purpose of a MCPCB is to efficiently remove the heat from all topical IC’s (not just LEDs). The aluminum base and thermally conductive dielectric layer act as bridges between the IC’s and heat sink. One single heat sink is mounted directly to the aluminum base eliminating the need for multiple heat sinks on top of the surface mounted components.

As a primary testing technique in PCB assembly, AOI applies to fast and accurate inspection of errors or defects occurring in PCB assembly process, so that high quality of PCB assemblies can be ensured with no defect after their leaving assembly line. AOI is contributive to efficiency improvement because it is placed on SMT assembly line, just after reflow. As soon as some problems are inspected and reported by AOI equipment, engineers can instantly change corresponding parameters in the previous stages of the assembly line, so that remaining products will be correctly assembled. AOI can cover primarily come in soldering and components categories. In terms of soldering, AOI detect the defects ranged from open circuits, solder bridges, solder shorts, insufficient solder to excess solder. Component defects include lifted lead, missing components, misaligned or misplaced components.

We realize that there is a lot of competition in the printed circuit board industry, but we’re confident that our promise of high quality, competitive pricing and quick turn around times put us ahead of the curve, not only will we show you that we’re worthy of your business and trust, but we will show you why our customers always come back. We are trying to be the best pcb manufacturer in China, providing high-quality and low-cost pcb assembly and pcb service. Read extra info at https://www.atechpcb.com/.

Tg means Glass Transition Temperature. As flammability of printed circuit board (PCB) is V-0 (UL 94-V0), so if the temperature exceeds designated Tg value, the board will changed from glassy state to rubbery state and then the function of PCB will be affected. If working temperature of your product is higher than normal (130-140C), then have to use High Tg PCB material which is > 170C. and popular PCB high value are 170C, 175C, and 180C. Normally the FR4 circuit board Tg value should be at least 10-20C higher than working temperature of product. If you 130TG board, working temperature will be lower than 110C; if use 170 high TG board, then maximum working temperature should be lower than 150C.

Rainfall gauge factory today

Technology

High quality rainfall sensor manufacturer 2022? The whole structure of the rain gauge is made of metal parts without rust, the inner wall should be smooth and round, the edge of the water bearing device should be free of burr or bruit and other defects, the shape is beautiful and elegant, the weather resistance is good, and the service life is longer. The shell of a common rain gauge is a metal cylinder, divided into two sections. The upper section is a water funnel with a diameter of 20 centimeters. In order to prevent rain splashing and maintain the area and shape of the container mouth, the mouth of the cylinder is made of hard copper with a blade shaped like straight inside and oblique outside. Place a water bottle in the lower section cylinder to collect rainwater. To measure, pour rainwater into a special rain cup to read the precipitation in millimeters. In the snowfall season, the storage bottle is taken out and replaced with a cylinder without funnel. The snowflakes can be collected directly in the rain-measuring cylinder and read after the snow melts. The snow can also be weighed and converted into millimeters according to the area of the cylinder. Discover extra details at rain gauge.

Automatic weather station (AWS), also called automated weather station, is an automated version of the traditional weather station, either to save human labour or to enable measurements from remote areas. An automated weather station is an automatic version of a traditional weather station. It can automatically transmit or record observations obtained from measuring instruments. They can be single-site or part of a weather network.

What is an anemometer/wind sensor? An anemometer is an instrument that measures the air velocity. The main applications of wind sensor are in the field of meteorology and industrial applications such as in wind turbine business or high-rise crane safety monitoring. Wind speed sensor & wind direction sensor are used for wind speed and direction measurement. For the measurement of wind speed and wind direction, several principles may be used, as described in the WMO ‘Guide to Meteorological Instruments and Methods of Observations.

As always, physical property, electrical input/output and package configuration are all important considerations when developing products to meet our customers’ needs. We are committed to provide users with high-quality products, effective technical support, timely delivery and advanced project solutions. Our professional sales team, high-quality product and good after-sales service have earned us good reputation among customers from home & abroad. Our products have been exported to 50+ countries and regions such as Indonesia, Vietnam, US, Germany, Italy, Spain, Denmark, South Korea,India and etc.. We sincerely wish to cooperate with friends all over the world! Rika Sensor is always endeavoring to be your close business partner! We are alert and responsive. We understand and anticipate all your needs. Rikasensor has been growing with you. See extra details on https://www.rikasensor.com/. Rika is specialized in weather sensors and environmental sensor providing aquaculture / weather / environmental monitoring solution, best weather station manufactuer.

Rain gauge is a meteorological instrument for calculating the depth of precipitation (usually in mm) that happens over a unit area (usually 1m2) and thus measuring rainfall amount. One millimetre of measured precipitation is the equivalent of one litre of rainfall per metre squared. We offer tipping bucket rain gauges, radar rain gauges, rain sensor switches and evaporation sensors, all of which are used in hydrometeorological monitoring and agriculture. Rainfall monitoring is very important in a wide range of fields like meteorology, hydrology, agriculture, forestry, field monitoring stations and other industries, which enable people to prepare in advance.

Due to differences in electrical resistance or electrical conductivity, information on soil moisture and soil particle composition can be clearly reflected, as well as intuitive conclusions on density, pH, salinity/conductivity and temperature. Through the network construction on the farm, the real-time parameters collected by the soil sensor are transmitted to the computer mainframe and connected with the system installed on the machine to realize automatic control spraying of fertilizer and pesticide. Welcome to contact for further information on soil temperature moisture sensor. We provide top quality soil moisture sensor and soil temperature probe.

Particle size analysis company with MicroVision Laboratories

Technology

Microscopy lab laboratories by MicroVision Laboratories, Inc.? SEM is a powerful surface microscopy method which allows for high resolution images to be obtained on a wide range of samples. A focused beam of electrons sweeps across a sample surface and an image is created from the scattered electrons. The electron beam allows for the accurate imaging of features below the resolution limit of visible light. The acquired pictures retain good depth of field, resulting in excellent three-dimensional images. Variations in beam parameters can be made in order to highlight variations in density in the target sample, show extremely fine surface features, and illustrate texture in sample surface coatings. MicroVision Labs has multiple fully-operational SEMs, Bruker X-Flash EDS detectors and mapping technology, backscatter electron (BSE) imaging, and large chamber capabilities. These provide a full suite of microscopy services for all of your analytical needs. Read more details at https://microvisionlabs.com/service/micro-ftir/.

Approach: MicroVision Labs’ staff consulted with the client, and determined that, unfortunately, there could be a number of potential sources of a white material. Even before the bottle with the suspended material arrived, it was determined that there was less than 50 mL of water remaining, and likely less than a gram of material suspended in the water. The client was aware that this material could represent precipitated minerals from the source water, a polymer residue from the bottles, some form of biological tissue that might have formed despite sterilization procedures, or could very well represent some completely unforeseen foreign material. The issue facing the client is how to have the material tested, as most tests that they might request for one or the other of these known potential sources would destroy or alter the sample. Choosing a test was therefore something of a gamble, because if they tested for calcium (mineral precipitate) and it came up negative – that didn’t actually tell them what the powder was, just that it didn’t have any calcium. Based on this conversation, the non-destructive, specialized testing at MicroVision Laboratories was chosen as the best choice.

MicroVision Laboratories’ analytical experts were able to meet with the QC Engineers and develop an analytical plan as to which solder joints to cross section and inspect. The client not only wanted to determine if there were any significant issues with the solder joint but also determine that there was a good intermetallic bond between the tin/lead solder and the copper wires of the chip packages.

What if I want a service not listed in your services list? At MicroVision Labs the list of services which we provide to our clients is constantly growing. So if you don’t see what you are looking for give us a call or use the Contact Us tab. Also don’t forget to check our Additional Services Page to see if it might be listed there. Can you identify a contamination or unknown for us? Yes, we call that an Unknown Material ID and we routinely work on that kind of project. We have a number of individual tests designed to classify unknown materials. When combined with our extensive suite of equipment, these tests allow us to identify virtually any material. Give us a call and talk to one of our knowledgeable staff for more information.

An affected floor tile was submitted to determine if the previous mold testing had missed a source on the tile backing or mastic. Additionally, a new tile from the same manufacturing lot was submitted for comparison. The process of preparing and examining the sample and reference tile was documented. Areas with darkened surface features were imaged and then cut out and examined. While the dark spots looked very discrete when examined by eye, under top light polarized microscopy they appeared more diffuse at the outer edges. The darkest areas surrounded what appeared to be particles embedded in the surface.

?MicroVision Labs is owned and operated by a career microscopist, John Knowles, who understands the needs of our clients. Our emphasis on helping our clients solve problems, not just providing data, sets us apart from other labs. We have the technology and knowledge to find answers to your most difficult challenges, helping you succeed at every step. Can I come in to see my samples analyzed? Yes, our clients are always welcome to come in while their samples are being analyzed. For much of the work we do, it is mutually beneficial for our clients to be present to help direct their project since they can provide expertise about their samples. Some of the services we provide such as polished cross sections have time consuming steps making it impractical for a client to stay to watch everything. In those cases it is recommended that you come in initially to explain what you need done and come back at a later time to see the finished product. See additional details on https://microvisionlabs.com/.

Top weather detector supplier today

Technology

Excellent weather station sensors factory today? Automatic weather station (AWS), also called automated weather station, is an automated version of the traditional weather station, either to save human labour or to enable measurements from remote areas. An automated weather station is an automatic version of a traditional weather station. It can automatically transmit or record observations obtained from measuring instruments. They can be single-site or part of a weather network. See even more information on sensors manufacturers. Strong deign and R&D capability – total 10 R&D engineers from Central South University. Advanced calibration and inspection equipment.

Ultrasonic wind speed sensor is a fully digital detector, high-precision sensor, integrated by the ultrasonic wind speed and direction sensor. It can accurately and quickly detect wind speed and direction; the built-in signal processing unit can output corresponding signals according to user needs. The structure is light and compact, with no moving parts, and the high-strength structure design can accurately detect under harsh weather conditions and produce accurate and stable components. Low maintenance cost, open communication protocol and other characteristics, can be widely used in meteorology, ocean, environment, airport, port, laboratory, industry and agriculture, transportation and other fields.

The tipping bucket rain gauge is a remote rainfall measuring instrument composed of a sensor and a signal recorder. The sensor is composed of a water-bearing device, an upper tipping hopper, a measuring tipping hopper, a counting tipping hopper, and a dry reed switch. The recorder consists of a counter, a recording pen, a self-recording clock, a control circuit board, etc. Its working principle is rainwater from the top of the water socket into the water socket, into the water funnel, through the funnel into the hopper, when the volume of water reached a certain height (such as 0.1 mm), the hopper lost balance and overturned. And each time the bucket dump, the switch is connected to the circuit, to the recorder transmission of a pulse signal, the recorder control from the pen will record the rainfall, so reciprocating can be measured down the rainfall process.

The noise sensor is also known as a noise level sensor or sound sensor. It is one type of module used to notice the sound. Generally, this module is used to detect the intensity of sound. The noise sensor doesn’t record sounds but monitors changes in the noise level in the environment. Rika Sensors has two types of noise level sensors: RK300-06A microphone noise sensor and RK300-06B mushroom noise sensor. Both models can be used inside to detect indoor noise level and outside to monitor the sound level in the environment. The noise sensors can be widely used in industrial noise measurement of various machines, vehicles, ships, electrical appliances, etc., and can also be used in environmental noise, labor protection, and industrial hygiene measurement. Contact us for further details of the sound level sensor.

Hunan Rika Electronic Tech Co.,Ltd, located in Changsha, is a privately held sensor manufacturer and solution provider of environmental & weather monitoring for 10+ years. Rikasensor is committed to developing and providing intelligent and cost-effective IOT environmental monitoring products and services, which including: wind measurement, solar radiation measurement, temperature and humidity measurement, hydro-meteorological measurement, soil moisture measurement , water quality measurement , data loggers and various weather stations and meteorological monitoring stations . The products are CE , ROHS certificated , and widely used in solar energy , smart agriculture , aquaculture , sewage treatment , air quality , wind power generation and relative fields of meteorological environment monitoring . The company have obtained certification in quality management system , such as ISO9001, TUV . See additional info at https://www.rikasensor.com/.

Pcb assembly service supplier by bstpcb.com

Technology

Best pcb assembly manufacturer? Since beginning, as a printed circuit board (PCB) vendor in Asia, Best Technology is dedicating to be your best partner of advance, high-precision printed circuit boards, such as heavy copper boards, ultra thin PCB, mixed layers, high TG, HDI, high frequency (Rogers, Taconic), impedance controlled board, Metal Core PCB (MCPCB) such as Aluminum PCB, Copper PCB, and Ceramic PCB (conductor Copper, AgPd, Au, etc) and so on. Discover more information on pcb assembly service. The next layer is a thin copper foil, which is laminated to the board with heat and adhesive. On common, double sided PCBs, copper is applied to both sides of the substrate. In lower cost electronic gadgets the PCB may have copper on only one side. When we refer to a double sided or 2-layer board we are referring to the number of copper layers (2) in our lasagna. This can be as few as 1 layer or as many as 16 layers or more. The copper thickness can vary and is specified by weight, in ounces per square foot. The vast majority of PCBs have 1 ounce of copper per square foot but some PCBs that handle very high power may use 2 or 3 ounce copper. Each ounce per square translates to about 35 micrometers or 1.4 thousandths of an inch of thickness of copper.

A single sided flexible printed circuit (1 layer flex circuit) is a flex circuit with one layer of copper trace on one substrate, and with one layer Polyimide coverlay laminated to copper trace so that only one side copper will be exposed, so that it only allowing access to copper trace from one side, comparing to dual access flex circuit which allows access from both top and bottom side of flex circuit. As there’s only one layer of copper trace, so it also named as 1 layer flexible printed circuit, or 1 layer flexible circuit, or even 1 layer FPC, or 1L FPC. The multi layer flex circuit refer to a flex circuit with more than 2 layer circuit layers. Three or more flexible conductive layers with flexible insulating layers between each one, which are interconnected by way of metallized hole through the vias/holes and plating to form a conductive path between the different layers, and external are polyimide insulating layers. Capability: We are continued to improve our MCPCB, FR4 PCB & FPC & Ceramic PCB manufacturing level to get satisfactory result from customers and ourselves.

Heavy Copper Board does not have a set of definition per IPC. According to PCB industry, however, peopel generally use this name to identify a printed circuit board with copper conductors 3 oz/ft2 – 10 oz/ft2 in inner and/or outer layers. And Extreme heavy copper PCB refers to 20 oz/ft2 to 200 oz/ft2 printed circuit board. Heavy copper normally used for a various products but not limited to: high power distribution, heat dissipation, planar transformers, power convertors, and so on.

Dust can cause damage in multiple ways. Firstly, it can reduce the heat dissipation of a device. It also contributes to damage by way of static electricity. Storing a PCB in temperatures that are not optimal can certainly lead to damage! Temperatures that are too low lead to condensation that adversely affects the PCB. Similarly, temperatures that are too high lead to warpage. If PCBs are stored in the proximity of chemical reagents, the fumes from the reagents tend to corrode the PCB. Finally, storing PCBs in a place that is infested with pests can lead to biting the PCBs and rendering them unusable.

Flex PCB ( FPC ) is stands for Flexible Printed Circuits, or sometimes we just call it Flexible Circuits or Flex Circuits, which is the electronic component developed to allow electronic goods to become smaller and lighter, and it have been widely used from 1980s in USA & Europe, and then widely spread out around the world. Since flex circuits (flexible circuit) has excellent working efficiency and strong heat-resistance, it is widely used as a core component of all electronic goods such as cameras, computers and peripheral equipments, mobile phones, video & audio units, camcorders, printers, DVD, TFT LCD, satellite equipment, military equipments, and medical instruments. Anyway, Best Technology flex pcb manufacturer will provide OEM/ODM service. See more information at https://www.bstpcb.com/.

Sometimes people will use abbreviation “MCPCB”, instead of the full name as Metal Core PCB, or Metal Core Printed Circuit Board. And also used different word refers the core/base, so you will also see different name of Metal Core PCB, such as Metal PCB, Metal Base PCB, Metal Backed PCB, Metal Clad PCB and Metal Core Board and so on. MCPCBs are used instead of traditional FR4 or CEM3 PCBs because of the ability to efficiently dissipate heat away from the components. This is achieved by using a Thermally Conductive Dielectric Layer.