Premium centrifuge separator manufacturer and supplier: The activated sludge flocs are slightly refined, with abnormal color, poor settling performance, turbid supernatant, and many small feathery sludge fragments; 2. Microscopic examination can reveal protozoa, but their numbers have sharply decreased. During the microscopic examination process, protozoa were found, but most of them have died or lost their activity; Under the microscope, the volume of sludge flocs is smaller and scattered than usual; 3. The sludge in the sedimentation tank floats in a cloud like manner, resulting in severe mud leakage from the effluent; 4. The final effluent quality is turbid, and the COD detection index is far higher than the normal fluctuation range; First, let’s understand the process of sewage treatment. Kitchen and restaurant sewage first enters the oil separator to remove large particles and floating oil before entering the regulating tank. Automatic grid: Set up a grid to remove large particulate matter and impurities in sewage, ensuring the continuous operation of subsequent treatment devices. The grid residue is regularly manually treated. After removing the floating debris, the sewage enters the regulating tank. A submersible sewage pump is installed in the regulating tank to lift the sewage, and a mixing system is set up in the regulating tank for stirring to prevent sediment. See additional info on sludge dewatering decanter.

The fundamental principles of operation for the 2 phase decanter centrifuge and 3-phase Shenzhou Machinery decanter centrifuges are identical to those of the horizontal decanter centrifuge. To separate substances with different densities, the equipment uses a high-speed rotating assembly to create an acceleration inside the bowl that is thousands of times stronger than gravity. Then, the relative motion between the bowl and the screw is generated by the differential gearbox, allowing for the separation of the substances. In contrast, 3 phase decanter centrifuges use centripetal pump technology to achieve solid-liquid-liquid three-phase separation, as opposed to Shenzhou Machinery 2-phase centrifuges, which are utilized for solid-liquid two-phase separation and discharge the solid slag and separation liquid from an opening at the bottom of the equipment collection box. Under the pressure of the centripetal pump, the heavy liquid phase is discharged through the flow outlet on the impeller. In contrast, gravity sends the solid slag and light liquid phase down from the bottom opening of the equipment collection box.

What are the uses of a decanter centrifuge? Apparently, decanter centrifuge manufacturers are shocked by how far we can go with supplying them with high-quality parts that are hollow and uniform. Superior decanter components are centrifugally cast with high-grade stainless steel, which resists corrosion, contamination, and high maintenance. Unlike other metals, centrifugally cast stainless steel features an even, defect-free grain, with no porosity to block leaks. Centrifugal casting decanter parts are typically high-strength, long-lasting, and highly reliable. Centrifugal casting decanter centrifuge parts have apparent advantages over forgings and welded sleeves.

High Speed Tubular Centrifuge, also called Tubular Bowl Separator or tubular bowl centrifuge, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation. See additional information on lnszjx.com.

The use of three-phase separation technologies is rising in the separation industry. When it came to separating oils and water, the industry particularly needed high-efficiency three-phase decanter centrifuges. Shenzhou Machinery Company has over 50 years of experience in the separation field, which they used to develop the 3 Phase decanter centrifuge. Its primary use is in solving the problem of simultaneous immiscible liquid and solid phase separation using the specific gravity difference. The need for stable, continuous operation around the clock can be met by the 3 Phase decanter centrifuge thanks to its mature design and high-quality raw material selection.

The structure and working principle of a Decanter centrifuge – The Decanter centrifuge relies on the density difference between solid and liquid phases, and under the action of centrifugal force, accelerates the settling speed of solid particles to achieve solid-liquid separation. There is a conical section designed in front of the drum, which rotates at a set speed according to the different properties of the material. The material rotates at the design speed on the inner wall of the drum, forming a concentric liquid layer along the drum shell, called the liquid ring layer. The solids contained in the material are deposited onto the wall of the drum under the action of centrifugal force, and then the dry material is pushed out of the drum through spiral operation. The operating speed of the drum directly determines the separation factor, while the speed difference of the screw directly affects the solid moisture content transported outside the drum. It has a direct impact on processing capacity, residence time, and solid discharge.