Led panel wholesale manufacturer with Grnled
Led street lights manufacturer and supplier in China: In terms of size, the magnetic track is mainly divided into two types: 20mm width (M20) and 35mm width (M35). The width of these two track strips determines the width of the corresponding magnetic lamp track head. That is, a 20mm wide track can only be installed with lamps with a 20mm width track head, and 35mm is also the same. Of course, recently there has been another slim type track, only with 15mm available in markets. From the installation way, the magnetic rails include a recessed magnetic track, suspended magnet track, and surface-mounted magnetic rails. Find even more information on led panel light manufacturers.
Are there any downsides to using LED landscape lighting? The main downside of LED landscape lighting is the initial cost. Compared to traditional light fixtures, LED lights are more expensive. However, you can save money in the long run because of their energy efficiency and longer lifespan. What should I keep in mind when I’m choosing fixtures for my LED landscape lighting? Two things you should keep in mind when choosing fixtures for your landscape lighting are the color temperature and the luminosity. The color temperature determines how “warm” or “cool” the light appears, while luminosity refers to its brightness.
When choosing exterior led floodlights, lumen value is more important than power value. Power value (Wattage) measures the energy required to illuminate the product, and lumens determines the brightness of the lamp. This means that the more lumens of the product, the brighter the lamp. Consumers should not choose projection lamps based on the power value (watts), but should consider how much brightness (lumens) they provide us.
Instantaneous start-up. No need for a pre-warm-up start-up. Low Light decay. It is 1% decrease at 3000 hours. 3% decrease in 10000 hours. Environment-friendly. Led floodlights do not contain mercury, toxic gases, and liquids, and will not pollute the environment. At the same time, some lamps can be replaced and reused by outdoor LED flood light bulbs. As the latest generation of lighting fixtures, LED floodlights have the characteristics of environmental protection, energy saving and high luminous efficiency. More and more people choose it to replace traditional metal halide flood light or HPS flood light. So, what is a LED floodlight equivalent to metal halide/HPS flood lights? Long warranty period: 2years warranty at least, it is ok to extend 5 to 10years according to the customer’s requirements.
All the magnetic linear track light systems can be with a smart solution. 0-10V dimmable / DALI dimmable; 2.4G WIFI, Bluetooth mesh, Zigbee smart magnet track lighting. Through a smart gateway(hub), they will be 3CCT color-changing and tunable in brightness by TUYA APP in a smartphone, and it is also available controlled by a remote controller, smart control panel, or smart speaker like Google Home, Amazon Alexa, etc. This smart magnetic track light is with Zigbee solution, remote control by TUYA APP on a smartphone, Google Home, Amazon Alexa speakers through the WIFI, and smart Zigbee Gateway(hub). It is tunable in color temperature (3CCT Color changing), and dimmable brightness. For the whole system, including low voltage DC48V smart magnetic linear lights, fold spotlights, magnetic grille spotlights, track spotlights, pendant lights, etc, available DIY light luminaires freely onto magnetic rail tracks. It is the perfect choice to do residential lighting for the kitchen, living room, and dining room.
Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
The magnetic grid spotlight is a directional lighting fixture with PMMA reflector and OSRAM chips with high CRI 90. Narrow beam angle 24°/36° optional. Suitable for use with magnetic line lights as basic lighting in the living room, dining room, corridor, etc. The magnetic linear lights also called magnetic linear floodlights, it is wide distribution 120° beam angle to be general lighting in large spaces like living rooms, offices, etc. Available 1ft/2ft/3ft/4ft in length. 3000K/4000K/6500K color temperature or 3CCT dimmable available.
What should I look for when buying solar street lights? Quality of the solar panel: Make sure the solar panel is of good quality and is able to generate enough power to charge the battery. Battery capacity: Make sure the battery has enough capacity to power the lights for the desired amount of time. you can check this blog: “What types of battery is the best for solar street lights?” to know more information about batteries. Lumens: Make sure the lights are bright enough to provide adequate illumination.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Discover more information at https://grnled.com/.
GRNLED and GOLUMEN is the best led light manufacturer in china, with ISO9001:2015 approval. And our products mostly got CE-LVD, EMC, and RoHS certificates. It is ok for us to get CB, ETL, SAA, UL, cUL, SASAO, etc if requested. OEM/ ODM available, making design freely for led lights, or color boxes. Providing IES Files for DiaLux testing. No MOQ limits for retailers, wholesalers, distributors, or engineering companies. Customization is available.