Top n n ethylene bis stearamide factory? The Sainuo plant was put into production in 2010, expanding from the initial one to the current three plants. At present, it has formed an international production of 30,000 tons of production capacity of polyethylene wax lubricating dispersant. The company has more than 100 employees, Upon technical support of professional polymer ,materials institutes of Qingdao University and Qingdao University of Science and Technology, and has a number of senior professional technical personnel and professional application laboratory, with strong independent R&D ability. Read additional details on ethylene bis-stearamide powder.

Polyethylene wax has good solubility with polyethylene, polypropylene, polyvinyl wax, ethylene propylene rubber and butyl rubber. It can improve the fluidity of polyethylene, polypropylene, ABS and the demoulding performance of polymethylmethacrylate and polycarbonate. Compared with other external lubricants, polyethylene wax has stronger internal lubrication for PVC. If you are looking for polyethylene wax suppliers, Sainuo will be the perfect choice. Sainuo is a professional polyethylene wax (PE wax) manufacturer for 15+ years, welcome to contact us for further information.

Polypropylene wax is a chemical substance produced by cracking, cut by heating, and pulverized by hot air. Higher melting point, lower melt viscosity, good lubricity, good dispersibility, can improve the gloss of plastic products. Widely used in chemical fiber pellets, electrostatic copy toner carrier manufacturing, ink abrasion resistance agent; LLDPE, HDPE and other polyolefin resin improvers and energy-saving agents; also used in polypropylene injection molding, drawing release agent, etc. Discover extra details on https://www.sainuowax.com/.

Color masterbatch is a colored particle made by uniformly attaching super constant pigment to resin after good dispersion. Color masterbatch is usually composed of pigment, carrier resin, dispersant and other additives. Restricted by the surface characteristics of pigments, the content of different varieties of pigments in color masterbatch is different. Generally, the mass fraction of organic pigments can reach 20% ~ 40%, while inorganic pigments are generally between 50% ~ 80%.

The internal and external lubrication is insufficient, the melt viscosity is large, the plasticizing torque is large, and the melt wall sticking phenomenon is serious. There is a yellow decomposition line on the material surface, the surface smoothness is poor, and the mechanical properties of the product are reduced: the internal and external lubrication is excessive, the plasticizing torque is small, and the melt plasticization is obviously insufficient. Although the product has good smoothness, the pressure point adhesion is poor, which seriously affects the mechanical properties of the product.