Custom industrial ovens
Encore’s single column overhead machine designs allow customers to view the process from the safety of the cleanroom. Dual columns have limited visibility requiring the process to be viewed from inside the booth. Blow-off: Using Encore engineered and designed standard machines and robot mounted assemblies Encore offers an extensive assortment of custom blow off systems for a wide variety of vehicle and product sizes. Blow off systems typically fan driven, electro-statically charged, to remove dirt and foreign particles from the surface of parts prior to painting. There are a variety of options on blow off systems, including: Stationary (fixed) or Machine/Robotic. Machine configurations are of various sizes and complexities, High/low volume, high/low velocity air, Compressed or fan driven air, PC based or PLC based visualization systems, PLC based with PC or Panel view Graphical User Interfaces, Clean Wall or In-booth Design, Vacuum collection and/or booth collection of dirt.
Automation systems spray a PVC or Polyurethane based material onto the rocker panel, sill, and under body to prevent stones and rocks from chipping the paint in this area. Also known as stone guard chip or SGC. TKS employs a large staff of full-time engineers. From sizing equipment based on heat loads and specifications to designing new layouts for brand new paint shops, our Engineering & CAD team can provide full-service engineering. We design custom paint booths, industrial ovens, and other paint process equipment.
From High-pressure water sprays to De-greasing to Surface Conditioner and Phosphate, and now, Metal Oxide Pretreatment for Aluminum bodies, TKS offers up to 10 different process steps to configure for your application. TKS’ electrical engineering department works with many manufacturers including Spang, Controlled Power, and more. TKS provides a variety of types of anodes: solid, flushing, roof-, wall-, and floor-mounted. We also design and provide the anolyte system. A properly sized and maintained UF system is key to a clean e-coat finish. Along with our patented counterflow innovation, TKS offers a cost-effective ED system. See additional info at tks paint shop.
TKS provides superior spray booth environments to achieve a high-quality paint finish with a wet or dry scrubber. We have recently updated our Dry Booth design to reduce maintenance and decrease operating costs via less limestone and less energy usage. Our wet booth scrubbers has been installed over 100 times worldwide.
TKS designs and builds several industrial ovens for paint drying and paint cure, including: ED oven, Sealer oven, Primer oven, and Topcoat (TC) Oven. These industrial ovens can operate for 30+ years with typical oven burner and fan maintenance. The oven is typically preceded by a setting tunnel to allow the solvent-borne clear coat a few minutes to flash in a controlled room temperature environment prior to entering the oven’s first heat-up zone where the water within the waterborne paint begins to flash off.
TKS Industrial Company is a world class designer and builder of Paint Finishing Systems and Pollution Abatement Systems for the automotive and related industries. We are dedicated to continually provide our customers with products and services of only the highest possible quality. See even more details on this website.